The POL-HM850 Polar Cover is designed to keep the JVC GY-HM850 or 890 camera warm when shooting in cold temperatures. It has a black nylon fabric exterior and is thickly padded and constructed of high loft insulation.
The interior is lined with Mylar fabric to reflect heat back into the camera chamber. Air activated warmers placed inside the case to maintain interior temperatures to keep battery, recorder, lens and hands warm. The case has been tested at minus 50 degrees Fahrenheit. Two hand openings at the lens are enclosed with fleece cuffs for warm access.
The attached insulated lens cover protects the lens in transport. It also prevents condensation from forming when bringing the Polar Cover in from the cold.
-Thickly padded and constructed of high loft insulation.
-Interior is lined with Silver Mylar Fabric to reflect heat back to the camera. Successfully tested at -500F (-100C)
-Touch Fastener strips line the interior of the Polar Bear for arranging optional air activated hand-warmers. They can be placed in pouches and stuck to areas near the battery to extend operating time. Heaters can also be positioned to keep lens and recorder section warm.
-Two-hand openings at the lens and 1 by the viewfinder are enclosed with cotton cuffs that keep hands warm and the cold out.
-Three sets of zippers for easy access to controls
-The snug bottom zipper pulls around tripod plate to allow tripod use
-Accepts microphones through the top zipper opposite the viewfinder
-A small lens cover is supplied with the Polar Bear to protect and keep camera insulated during transportation. The cover is stored in the front pocket.
-Rings are attached to the case to carry an HB-10/10P, HB-15/15P or HB-40 Shoulder Strap
- 1x CARA-BRNZ Carabiner with Flashlight - 1x CS-B9 Stuff Sack (Black, Single P
The CAR-4CAM has 12 inches of interior height to fit cameras in Shoot-Ready format. It has an ultra-light design, featuring dual-rigidity foam for maximum equipment protection. It is designed to fit Pro Video Cameras up to 24" long. This rugged case is constructed using long-life materials including 1000-denier Cordura® nylon and solid steel clip rings. Reversed zippers and a slip-not anti-skid waterproof bottom panel are used for increased water-resistancy and durability.
Arrive at your venue in Shoot Ready format knowing everything you need is packed, organized and accessible. The 12.5" interior height allows for shoot-ready equipment configurations and the easy-open, quick-draw design means you'll never miss the shot. There are front and back slip pockets for carrying SD cards, documents, cords, and white balance cards. The 2 side pockets are perfect for batteries, extra flashes, and cords.
The interior of the case is made using a copper-colored Veltex that contrasts against camera and lenses for clear visibility of the case contents. Completely customize your interior setup using the positionable interior divider system, including 1 horizontal divider, 2 x DIV-7X3 bendable dividers, 1 padded divider pouch, 1 padded 4" lens cup / storage pouch, 2 custom camera tie-downs and a white balance card.